ADILITHE ® LF 200 series :free PPDI <0.1% by weight, superior mechanical properties to Vulkollan ® or Adiprene ® - Type L or LFP

The ADILITHE® LF 200 series composed of PPDI - Polycaprolactone prepolymer with very low free PPDI <0.1% by weight, allow to obtain a no toxic polyurethan system and to reduce processing hazards and to minimize control of worker exposure to PPDI.

Based on Polycaprolactone

Our systems are characterized among others by excellent resistance to tear strength, a long pot life, good dynamic properties and a low compression set.

- ADILITHE® LF 201 + ADIPOL 200 : 88 shore A
Compression set 22H/70°C = 20% / Pot life = 6/7 min / Tear strenght with nick = 67,8 kN/m

- ADILITHE® LF 201 + ADIPOL 100 : 94 shore A
Compression set 22H/70°C = 48% / Tear strenght with nick = 82,9 kN/m

- ADILITHE® LF 201 + ADIPOL 101 : 85 shore A
Compression set 22H/70°C = 28% / Long Pot life = 8 min

- ADILITHE® LF 202 + ADIPOL 200 : 90 shore A
Compression set 22H/70°C = 21% / very long Pot life = 14 min / Tear strenght with nick = 75 kN/m

- ADILITHE® LF 202 + ADIPOL 100 : 94 shore A
Compression set 22H/70°C = 25% / very long Pot life = 12 min / Tear strenght with nick = 100 kN/m

Based on Polyether

- ADILITHE® LF 200 + ADIPOL 100 : 94 shore A
Long Pot life = 6 min / Tear strenght with nick = 83 kN/m / Low heat build-up due to hysteresis in high speed and load bearing - Thermomechanical fatigue test

Somes versions based on Polycarbonate / Ether are under development.

Contact

For more information

Contact us

Documents

Techncials Data Sheets

Materials Safety Data Sheets

DMA analysis - ADILITHE ® LF 200 + ADIPOL 100

Compression Set

 

Copyright © 2012 MERYLITHE. All rights reserved.
Mentions légales